CT715 – SKX013 To Mini Turtle Conversion Case – Crown At 4 – Black

  • Material – HQ Stainless Steel 316L surgical grade.
  • COMES WITH A FREE CROWN AS APART OF OUR LAUNCH PROMOTION!!
  • Description – Convert your SKX013/15 200M Divers Watch to a MINI SRP TURTLE with this superb unique case. OR BUILD A SRP MINI TURTLE TO YOUR OWN SPEC WITH THIS SUPERB CASE – Reminds us a little of the classic vintage seiko 6105-8000. Full size MINI TURTLE look case 20mm lug width – CROWN AT 4*** – oem and aftermarket bracelets fit. Fully tested to 200M PLUS. SKX013 parts fit* – Drilled Through Lugs**
  • Dimensions – Diameter 39mm (without crown) – lugs tip to tip 43.5mm
  • *Crystal, Chapter Ring, Bezel, Bezel Insert, movement, case back, all gaskets, bracelet – ALL FIT BUT NOT OEM FIXED STEM CROWN
  • **Great for easy strap and bracelet change – reducing the risk of marking/damaging your case
  • *** IMPORTANT – This is a crown at 4 case so please familiarize yourself with the work required if you are using a NH35/36 movement – IF you require crown at 3 please go to CT714
  • ***NOTE THE CT210 CROWN DOES NOT FIT DUE TO A TOLERANDE ISSUE WE ARE CORRECTING
  • Included FREE with every case – Crystal Gasket (fitted) – Case Back Gasket – 2 x 20mm Fat Spring Bars 
  • Finish – Black
  • Water Resistance – As oem
  • Additional info – A unique conversion case allowing the mass of SKX013 mod parts available to be used for a Mini Turtle build to your own specification.
  • FREE CROWN + stem ( Launch promotion )

CT714 – SKX013 To Mini Turtle Conversion Case – Crown At 3 – Black

  • Material – HQ Stainless Steel 316L surgical grade
  • Description – Convert your SKX013/15 200M Divers Watch to a MINI TURTLE with this superb unique case. OR BUILD A MINI TURTLE TO YOUR OWN SPEC WITH THIS SUPERB CASE – Full size MINI TURTLE look case 20mm lug width – CROWN AT 3*** – oem and aftermarket bracelets fit. Fully tested to 200M PLUS. All SKX013 parts fit* – Drilled Through Lugs**
  • Dimensions – Diameter 39mm (without crown) – lugs tip to tip 43.5mm
  • *Crystal, Chapter Ring, Bezel, Bezel Insert, movement, case back, all gaskets, bracelet – ALL FIT – BUT NOT THE OEM CROWN WITH FIXED IN STEM WE RECOMMEND OUR CT210 OR CT271 (BIG CROWN FOR CROWN AT 3 NCG)
  • **Great for easy strap and bracelet change – reducing the risk of marking/damaging your case
  • *** IMPORTANT – This is a crown at 3 case so please familiarize yourself with the work required if you are using your original movement/dial – IF you require crown at 4 please go to CT715
  • Included FREE with every case – Crystal Gasket (fitted) – Case Back Gasket – 2 x 20mm Fat Spring Bars
  • Finish – Black
  • Water Resistance – As oem
  • Additional info – A unique conversion case allowing the mass of SKX013 mod parts available to be used for a Mini Turtle build to your own specification.

CT714 – SKX013 To SRP Mini Turtle Conversion Case – Crown At 3 – Polished/Brushed

  • Material – HQ Stainless Steel 316L surgical grade
  • Description – Convert your SKX013/15 200M Divers Watch to a MINI TURTLE with this superb unique case. OR BUILD A MINI TURTLE TO YOUR OWN SPEC WITH THIS SUPERB CASE – Full size MINI TURTLE look case 20mm lug width – CROWN AT 3*** – oem and aftermarket bracelets fit. Fully tested to 200M PLUS. All SKX013 parts fit* – Drilled Through Lugs**
  • Dimensions – Diameter 39mm (without crown) – lugs tip to tip 43.5mm
  • *Crystal, Chapter Ring, Bezel, Bezel Insert, movement, case back, all gaskets, bracelet – ALL FIT – BUT NOT THE OEM CROWN WITH FIXED IN STEM WE RECOMMEND OUR CT210 OR CT271 (BIG CROWN FOR CROWN AT 3 NCG)
  • **Great for easy strap and bracelet change – reducing the risk of marking/damaging your case
  • CROWN SELECTION – CHECK OUT CT271 FOR THIS CASE IT’S SUPERB
  • *** IMPORTANT – This is a crown at 3 case so please familiarize yourself with the work required if you are using your original movement/dial – IF you require crown at 4 please go to CT715
  • Included FREE with every caseCrystal Gasket (fitted)Case Back Gasket2 x 20mm Fat Spring Bars
  • Finish – High Polish/Brushed Case – similar to oem
  • Water Resistance – As oem
  • Additional info – A unique conversion case allowing the mass of SKX013 mod parts available to be used for a Mini Turtle build to your own specification.
1

CT715 – SKX013 To Mini SRP Turtle Conversion Case – Crown At 4 – FREE CROWN – Polished/Brushed

  • Material – HQ Stainless Steel 316L surgical grade.
  • COMES WITH A FREE CROWN + STEM AS APART OF OUR LAUNCH PROMOTION!!
  • Description – Convert your SKX013/15 200M Divers Watch to a MINI SRP TURTLE with this superb unique case. OR BUILD A SRP MINI TURTLE TO YOUR OWN SPEC WITH THIS SUPERB CASE – Reminds us a little of the classic vintage seiko 6105-8000. Full size MINI TURTLE look case 20mm lug width – CROWN AT 4*** – oem and aftermarket bracelets fit. Fully tested to 200M PLUS. SKX013 parts fit* – Drilled Through Lugs**
  • Dimensions – Diameter 39mm (without crown) – lugs tip to tip 43.5mm
  • *Crystal, Chapter Ring, Bezel, Bezel Insert, movement, case back, all gaskets, bracelet – ALL FIT BUT NOT OEM FIXED STEM CROWN
  • **Great for easy strap and bracelet change – reducing the risk of marking/damaging your case
  • *** IMPORTANT – This is a crown at 4 case so please familiarize yourself with the work required if you are using a NH35/36 movement – IF you require crown at 3 please go to CT714
  • ***NOTE THE CT210 CROWN DOES NOT FIT DUE TO A TOLERANDE ISSUE WE ARE CORRECTING
  • Included FREE with every caseCrystal Gasket (fitted)Case Back Gasket2 x 20mm Fat Spring Bars 
  • Finish – High Polish/Brushed Case – similar to oem
  • Water Resistance – As oem
  • Additional info – A unique conversion case allowing the mass of SKX013 mod parts available to be used for a Mini Turtle build to your own specification.
  • FREE CROWN + stem ( Launch promotion ) – DIY required to be cut and fit

CT056 – Double Dome Sapphire Crystal – Monster SNE107 & More

Material – Sapphire Crystal

Type/Design – Double Dome (Domed Top Domed Underside)

Suitable forSeiko SKX031 SKX033 SKX779 SKX781 7S26-0350/1 SRP307K1 SRP309K1 SRP311K1 SRP313K1 SRP315K1 SKX031 SKX033 SZEN002 SZEN006 SZEN007 SZEN009 SZEN010. Seiko Mini Baby Turtle* – SRPC35K1 SRPC37K1 SRPC39K1 SRPC41K1 *No cyclops date magnifier. Invicta 200M – 8926OB 30mm sapphire -SNE107 SNE109

AR* coating options – blue, No AR and Clear AR**

Ref dimensions – Dia 30mm Thickness 4.3mm Edge 2.3mm – Dome 2mm

Important Note – If you have an 8926 Invicta with 29.5mm sapphire go to item number CT091 which we produced for that version

Additional info below in product description